Announcement

Collapse
No announcement yet.

Dropped deck SUP 14' x 21.5"

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Georgeous! Hope it will run as fast as espected and no water intakes...

    How did you glass the almost right angles between the step deck and the little walls. Just one layer of glass for the horizontal and one for the vertical, which meet in the corner, reinforced by resin, or does the glass follow the angle, forming a rounded inside angle? (Hope you get, what I mean... )
    The best surfer is the one with the biggest smile on his face...

    Comment


    • #32
      Originally posted by Olddude View Post
      Georgeous! Hope it will run as fast as espected and no water intakes...

      How did you glass the almost right angles between the step deck and the little walls. Just one layer of glass for the horizontal and one for the vertical, which meet in the corner, reinforced by resin, or does the glass follow the angle, forming a rounded inside angle? (Hope you get, what I mean... )
      I used a very small fillet of thickened epoxy working to masking tape. I tooled the inside corner with a shaped putty. I lay in the deck glass first then bring the rail glass down around the fillited corner and out on the deck to a cut lap. I wrap most every corner, in some cases using masking tape to pull/hold the glass into position.
      Randy http://clearwoodpaddleboards.com/
      https://www.youtube.com/channel/UCuW...E0CzWCHvzwiVJQ

      Comment


      • #33
        Awesome just didn't do it justice. Great work.

        Comment

        Working...
        X